作者：王鹏1,2, 塔依尔·斯拉甫力2, 赵宏亮2, 霍阔3, 万鸿飞4
作者单位：1. 石河子大学机械电气工程学院, 新疆 石河子 832003;
2. 新疆维吾尔自治区计量测试研究院, 新疆 乌鲁木齐 830011;
3. 深圳中图仪器股份有限公司, 广东 深圳 518000;
4. 无锡莱浙光电科技有限公司, 江苏 无锡 214000
关键词：影像式;钢卷尺;标准装置;图像处理;重复性试验
摘要：
图像采集及处理是影像式钢卷尺全自动标准装置稳定性、可靠性的关键。该研究对采集的图像进行降噪、阈值分割、图像中刻线边缘检测等技术处理；同时为适应不同生产厂家和不同类型的钢卷尺所具有的刻线特征，设计了最长刻线识别、最靠近起始刻线识别、最高刻线识别三种定位算法；然后，完成样机的试制，并进行相机像素标定及工作钢卷尺示值误差标定；最后选择20 m量油尺、5 m弧面式工作钢卷尺、30 m摇架式工作钢卷尺为试验对象，分别进行重复性试验，得出各钢卷尺示值误差在允许范围之内、重复性试验结果均满足不确定度评定要求。该研究结果为钢卷尺全自动检定、图像处理及边缘检测等技术提供借鉴与参考。
research and experiment on key technology of image form steel tapes standard device
wang peng1,2, tayier·silafuli2, zhao hongliang2, huo kuo3, wan hongfei4
1. college of mechanical and electrical engineering of shihezi university, shihezi 832003, china;
2. xinjiang uygur autonomous region research institute of measurement & testing, urumqi 830011, china;
3. shenzhen zhongtu instrument co., ltd., shenzhen 518000, china;
4. wuxi laizhe photoelectric technology co., ltd., wuxi 214000, china
abstract: image acquisition and processing was the key to the stability and reliability of the standard device of image steel tapes. in this study, the noise reduction technique, image threshold segmentation method,edge detection algorithm were carried out in the process of image processing. at the same time, in order to adapt to the characteristics of different manufacturers and different types of steel tapes, three locating algorithms were designed, including longest line identification, closest to the start line identification, highest line identification. then, the prototype was trial-produced, the camera pixel was calibrated and the error of working steel measuring tape was calibrated. finally, 20 m oil gauge, 5 m curved surface type working steel measuring tape and 30 m shaking frame type working steel measuring tape were selected as test objects to conduct repetitive experiment respectively. it was concluded that the error of each steel measuring tape was within the allowable range and the repetitive experiment results all met the evaluation requirements of uncertainty. the research results provide reference for automatic verification, image processing and edge detection of steel measuring tape.
keywords: image type;steel measuring tapes;standard device;image processing;repetitive experiment
2023, 49(6):49-55,61 收稿日期: 2022-03-18;收到修改稿日期: 2022-05-29
基金项目:
作者简介: 王鹏(1984-),男,安徽太和县人,高级工程师,博士,研究方向为工程及流量计量技术研究
参考文献
[1] 万鸿飞, 罗宁. 钢卷尺全自动检测方法的讨论[j]. 计量与测试技术, 2017, 44(3): 36-38 40
[2] 赵保亚, 魏彩乔. 基于边缘检测的钢卷尺图像二值化方法[j]. 现代制造工程, 2012(12): 101-104
[3] 万鸿飞, 赵宏亮. 工作钢卷尺全自动标准装置的研制[j]. 工业计量, 2016, 26(s2): 23-26
[4] 卢其伦, 张圆明, 马健, 等. 燃气表示值误差检定时数据自动采集存在的问题及改进措施[j]. 中国测试, 2021, 47(s2): 11-14
[5] 马海蓉, 丁飞, 章华涛, 等. 基于光栅图像识别的目标定位优化方法研究[j]. 中国测试, 2021, 47(12): 29-33
[6] 曹慧峰, 朱均超, 刘欣宜, 等. 一种快速光栅条纹中心亚像素坐标提取方法[j]. 激光杂志, 2021, 42(3): 52-57
[7] 何勇, 蒋浩, 方慧, 等. 车辆智能障碍物检测方法及其农业应用研究进展[j]. 农业工程学报, 2018, 34(09): 21-32
[8] 贺峰, 杨青丰, 刘思雨. 番茄叶面积数据智能采集系统软件开发及试验研究[j]. 农机化研究, 2022, 44(11): 155-158
[9] 魏彩乔, 王晓光, 康会峰. 基于图像处理的钢卷尺自动检定系统[j]. 仪表技术与传感器, 2012(06): 88-90
[10] 高廷, 孙安斌, 邹志, 等. 全自动钢卷尺检定装置的设计与实现[j]. 计测技术, 2020, 40(05): 10-14
[11] 钢卷尺: jjg4-2015[s]. 北京：中国计量出版社，2015.
[12] 王蕾, 万鸿飞. 钢卷尺全自动检测装置视觉技术与系统[j]. 计量与测试技术, 2017, 44(02): 29-30
