作者：潘刚, 梁玉英, 吕萌, 张国龙, 李伟, 孟军
作者单位：军械工程学院, 河北 石家庄 050003
关键词：雷达; 性能退化; 双应力步降加速退化试验; 优化设计
摘要：
针对某型雷达板级的性能往往受到多个应力的影响,且在加速退化试验中该产品有限试验时间内难以获得大量性能退化信息的问题,提出一种雷达板级双应力交叉步降加速退化试验优化设计方法。采用monte-carlo对加速试验进行仿真模拟,在样本量大小一定的条件下,以监测频率、应力水平数、监测次数作为设计变量,以总的试验费用作为约束条件,以正常使用应力下的p阶分位寿命渐进方差估计作为目标函数,建立下双应力交叉步降加速退化试验优化设计模型。通过仿真实例,验证了该方法的有效性、可行性。
optimization design of radar board laver double-cross-step-down-stress accelerated degradation test
pan gang, liang yu-ying, lü meng, zhang guo-long, li wei, meng jun
ordnance engineering college, shijiazhuang 050003, china
abstract: according to the fact that the performance of the radar board laver is affected by several stresses and it is hard to get the performance degraded information in the limited test time of the accelerated degradation test, this paper presented a method of optimal design for the double-step-down-stress accelerating degradation test (dsds-adt) on condition of small sample. the procedure of the test was simulated with monte-carlo in the condition that the sample size was specified. number of stress and inspection frequency were considered as variables and the asymptotic variance estimation of 100pth percentile of the lifetime distribution of the product at use condition was considered as the goal function under the constraint of the total experiments cost. the optimal designed model of the radar board laver double-step-down-stress accelerated degradation test (dsds-adt) was established. simulation results verify the feasibility and validity of this method.
keywords: radar; performance degradation; dsds-adt; optimal design
2014, 40(1): 137-140 收稿日期: 2012-9-14;收到修改稿日期: 2012-11-16
基金项目: 国家自然科学基金项目(61271153)
作者简介: 潘刚(1987-),男,山东新泰市人,硕士研究生,专业方向为武器系统性能检测与故障诊断。
参考文献
[1] wu s j, chang c t. optimal design of degradation tests in presence of cost constraint[j]. reliablity engineering and system safety,2002,76(2):109-115.
[2] zhang j r, jiang t m, li x y, et al. optimization of step stress accelerated degradation test plans[c]//17th international conference on industrial engineering and engineering management,ie and em 2010.china,2010(10):947-951.
[3] liao c m, tseng s t. optimal design for step-stress accelerated degradation tests[j]. ieee transactions on reliability,2006,55(1):59-66.
[4] tang l c, yang g y, xie m. planning of step-stress accelerated degradation test[c]//rams,los angeles,usa,2004:278-292.
[5] ge z z, li x y, zhang j r. planning of step-stress accelerated degradation test with stress optimization[c]//advanced materials research,germany,2010:118-120,404-408.
[6] li x y, jiang t m. optimal design for step-stress accelerated degradation with competing failure modes[c]//annual reliability and maintainability symposium,2009:64-68.
[7] 潘正强,周经伦,彭宝华. 基于wiener过程的多应力加速退化试验设计[j]. 系统工程理论与实践,2009,8(29):64-71.
